Possible: The UV inks used have a color brilliance of at least 10 years indoors and at least 5 years outdoors. To ensure the longevity of the print, all surfaces should be free of dust and grease, as well as holes, cracks, protruding objects, and dents.

Limitation: The device can only compensate for surface unevenness up to 8 mm and guarantee a perfect result. Deeper unevenness or joints may appear unclean.

Possible: All types of surfaces can be printed in the following dimensions:

• Height: up to approx. 4 m,

• Width: unlimited
  

Restriction: The printer requires space to operate. These minimum clearances must be maintained:

• Ceiling: approx. 170cm

• Wall (print area) : approx. 100cm

Attention: Prints cannot be made borderless on walls, floors, and ceilings;

small distances must be maintained.

Due to the physical construction and printing technology, it is necessary

Non-printable margins to adjacent edges (corners, ceiling, floor) must be taken into account. The exact dimensions of these margins are:

• Left: approx. 6 cm

• Right: approx. 10 cm

• Top/Bottom: Approx. 25 cm each

Possible: The printer runs on permanently installed rollers and prints automatically after manual adjustment.

Limitation: If the floor surface is uneven or bumpy, the printer is installed on a rail system. Even the slightest unevenness would affect the print.

Steep gradients or inclines should be avoided.

Possible: Almost any surface can be printed on – including wood, metal, glass, brick, tile, clinker, plaster, tiles, plastic, natural stone (e.g. granite, marble, slate), wallpaper (including woodchip wallpaper), mobile displays, billboards and signs.

Restriction: The surface to be printed must be vertical (at a 90° angle) to the printer and free of dust and grease.